Wall Ideas For Basement

Tile the Walls for Easy Care

Finished basement walls normally involves attaching wood furring strips or 2x4 studs to masonry walls, then adding covering and insulation with drywall. Tile is put within the drywall as for almost any bathroom or toilet installation.

Create a Message Board

At a cellar hobby area or office, turn one wall in an oversized message board. This therapy works in for basements where humidity and moisture are not an issue. And this therapy helps reduce sound and echoing.

Leave Brick Exposed for an Urban Appearance

If your home's foundation walls are brick instead of the more common poured concrete or concrete block, leave them vulnerable for a posh loft look in the basement. This basement office will get light from windows that are above-grade. In their normal state the brick walls are for hip style and the timber flooring joists overhead are exposed.

Mask Block Wall with Paint

In case your concrete-block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint using a high quality latex paint.

Attain a Modern Log Cabin Look

Walls coated in hot walnut tongue-and-groove siding, and a stone and wood fireplace provide this cellar a rustic log-cabin feel, lookBasement Renovations Toronto .

Paint a Lively Grid on Basement Walls

Brighten a basement playroom using a grid of colorful rectangles. This layout is most effective for drywall and is recommended for walls that are straight and plumb. The part of the process is currently measuring the grid off, using a carpenter's level to make sure that the lines are straight.

A Specific Wainscot Measures Up

Old yardsticks attached to the wall between 1x4 dividers create a dense and interesting texture on a cellar wall. Try this onto some space divider that is brief or a point wall--the number will determine how wide each segment between the dividers ought to be.

Maximize with Molding and Paint

Arts and Crafts-style wainscoting isn't hard to produce with plywood, crown molding, and 1x3 boards.